Converting DXF file to STL

Home Forums DIY Sand Table Converting DXF file to STL

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #871
    bliksem
    Participant

    I’m failing to convert the DXF files for the motor frame to STL. I’ve tried for 4 hours using Autodesk, OpenSCAD, FreeCAD and various online file conversion utilities. I’m not getting any valid STL files. I’m just too daft to figure this out 🙂
    I will be very grateful if someone would share the STL files please.

    #873
    Matt G
    Keymaster

    I just converted them using Fusion 360 and posted them in the original parts section of my models github repo:

    https://github.com/grammesm/Sandbot-Models/tree/master/Original%20Parts

    #874
    bliksem
    Participant

    Thank you, very much appreciated

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.